4
RECOMMENDED ACCESSORIES
This is a partial list of items required to finish the Pilatus PC6-L
that may require planning or decision-making before starting
to build. Order numbers are provided in parentheses.
RECOMMENDED DRIVE SET
❍
1 x Motorset FW5065/330-4 (FWLA8009)
❍
1 x Lipo 6s 5000 mAh 60C (FPWP3506)
RC EQUIPMENTS
❍
5 x Servo TSX45 (TACM0245) for AI, EL, RU
❍
3 x Servo TSX55 (TACM0255) for FL, towing dev.
❍
1 x Rx with at least 9 channels
❍
2 x Servo extension cable EL 90cm (HCAQ7314)
❍
2 x Servo extension cable AI 60cm (HCAQ7313)
❍
2 x Servo extension cable FL 30cm (HCAQ7311)
❍
1x Servo extension cable TD 45cm (HCAQ7312)
❍
1x Servo extension cable RU 20cm (HCAQ7361)
❍
1x Servo extension cable ESC 15cm (HCAQ7310)
ADDITIONAL ITEMS REQUIRED
HARDWARE AND ACCESSORIES
In addition to the items listed in the “Decisions You Must
Make” section, following is the list of hardware and accessories
required to finish the Pilatus PC6-L. Order numbers are
provided in parentheses.
❍
Hook & Loop Velcro (GPMQ4480) or
❍
Flitework 200mm battery belt.
COVERING ACCESSORIES
❍
21st Century® sealing iron (COVR2700)
❍
21st Century trim seal iron (COVR2750)
❍
21st Century iron cover (COVR2702)
ADHESIVES AND BUILDING SUPPLIES
In addition to common household tools and hobby tools, this
is the “short list” of the most important items required to build
the Pilatus PC6-L. Great Planes Pro™ CA and Epoxy glue are
recommended.
❍
1/2 oz. Thin Pro CA (GPMR6001)
❍
1/2 oz. Medium Pro CA+ (GPMR6007)
❍
6-Minute Epoxy (GPMR6045)
❍
30-Minute Epoxy (GPMR6047)
❍
Small T-pins (HCAR5100)
❍
Electric drill
❍
Drill bit set including (1/16" 3/32" 1/8" 5/64" and 1/2" bits)
❍
Small Phillips and flat blade screwdrivers (HCAR1040)
❍
Pliers with wire cutter (HCAR0630)
❍
Standard Hex wrench set (HCAR0520)
OPTIONAL SUPPLIES AND TOOLS
Here is a list of optional tools mentioned in the manual that
will help you build the Pilatus PC6-L.
❍
Great Planes CG Machine™ (GPMR2400)
❍
Top Flite® Precision Magnetic Prop Balancer™ (TOPQ5700)
❍
Straightedge with scale (HCAR0475)
❍
Cutting mat (HCAR0456)
❍
Masking Tape (TOPR8018)
❍
CA Applicator Tips (GPMR6033)
❍
CA Debonder (GPMR6039)
❍
CA Accelerator (GPMR6034)
❍
Milled Fiberglass (GPMR6165)
❍
Microballoons (TOPR1090)
❍
R/C-56 Canopy Glue (JOZR5007)
❍
Epoxy Brushes (GPMR8060)
❍
Mixing Sticks (GPMR8055)
❍
Threadlocker (GPMR6060)
❍
Denatured Alcohol (for epoxy clean up)
❍
Hobby Knife (HCAR0105), #11 Blades (HCAR0211)
❍
Non-elastic monofilament or Kevlar fishingline (for stab
alignment)
❍
Builders Triangle Set (HCAR0480) (for fin alignment)
❍
Easy-Touch™ Bar Sander (GPMR6170, or similar)
❍
Felt-Tip Marker (TOPQ2510)
❍
Small metal file
❍
Rotary tool such as Dremel®
❍
Rotary tool reinforced cut-off wheel (GPMR8200)
❍
Curved Tip Canopy Scissors for trimming plastic parts
(HCAR0667)
❍
Dead Center™ Engine Mount Hole Locator (GPMR8130)
❍
Great Planes AccuThrow™ Deflection Gauge (for
measuring control throws, GPMR2405)
ENGLISH
