2
GENERAL INFORMATIONS
•
Read this manual and its safety precautions carefully! Keep this manual and if
you give the model to a third party, put this manual to the model.
•
Take care, that you are familiar with your transmitter and all electronic
components, used in your plane.
•
Take care of all safety instructions of tools, which are you using to assemble
this model.
•
Only take glues, which are recommended for the specific materials and which
are approved for model business.
•
Before assembling please check all parts of this kit. If some parts are missing or
have a mistake, please call our service center.
ENVIRONMENT PROTECTION INFOS
•
The symbols on the package show you, that the model
and its accessories should not be put to waste. All electric
and electronic parts should be deposed to places of
waste management.
•
Batteries and accumulators must
be removed from the devices and
should be deposed to the correct
waste management organisation. Take
information from your home town
government.
ENGLISH
TABLE OF CONTENTS
General informations
..........................................................
2
Environment protection infos
........................................
2
Introduction
............................................................................
2
Safety precautions
...............................................................
3
Recommended accessories
..............................................
4
Recommended drive sets ..............................................
4
RC Equipments ..................................................................
4
Adhesives and Building Supplies ................................
4
Spare parts for the ZLIN 50 LX
........................................
4
Kit content
................................................................................
5
Kit check
....................................................................................
5
Symbols for the building
...................................................
5
1 - Aileron
..................................................................................
6
2 - Aileron servo
.....................................................................
6
3 - Main wing
...........................................................................
6
4 - Stabilizer / Vertical fin
..................................................
7
5 - Stabilizer Struts
...............................................................
7
6 - Elevator pushrod
............................................................
7
7 - Rudder Pullwire
...............................................................
8
8 - Radio Equipment
............................................................
8
9 - Landing gear
.....................................................................
8
10 - Brushless Motor
............................................................
9
11 - Main wing
........................................................................
9
12 - Cowling and canopy
...................................................
9
Get the model ready to fly
.............................................
10
Check the Control Directions ....................................
10
Balance the Model (C.G.) .............................................
10
Balance the Model Laterally ......................................
11
Set the Control Throws ................................................
11
Preflight
..................................................................................
11
Identify your model ......................................................
11
Charge the Batteries .....................................................
11
Balance Propellers .........................................................
12
Range check ....................................................................
12
ENGINE SAFETY PRECAUTIONS
...................................
12
Safety code
............................................................................
12
General ..............................................................................
12
Radio control ...................................................................
12
Check-List
..............................................................................
13
Introduction
The classic aerobatic plane Zlin 50L is used from the Flying Bulls Aerobatic Team for a long time. On a lot of flight
shows and events, the Flying Bulls Aerobatic team demonstrated amazing figures and stunning maneuvers. The
Flitework Zlin 50-M is a very powerful and stable flying replica of this famous plane.
Enjoy at http://www.flyingbulls.cz/start_e.html
Attention please!
Remote controlled model planes are not a toy! For assembling, flying and servicing such models, you need a high
grade of technical comprehension and liability.
Careless assembling and operation may cause personal and material damage.
Because the Flitework GmbH has no influence on assembly, RC installation, operation and servicing of the flight
device, any liability is rejected under explicit advice to these dangers.
