• Use care to avoid touching the propeller anytime the
engine is running. Pay equally close attention to items
such as loose clothing, shirtsleeves, ties, scarves, long hair
or anything that may become entangled in the spinning
prop. If your fingers, hands, etc. come in contact with
the spinning propeller, you may be severely injured.
• The speed and mass of this boat can inflict property damage
and severe personal injury if a collision occurs. Never run
this boat in the presence of swimmers or where the
possibility of collision with people or property exists.
• Model engines generate considerable heat. Do not touch
any part of your engine until it has cooled. Touching
the muffler, cylinder head, or exhaust header may result in
a serious burn.
• Gasoline is poisonous. Do not allow it to come into
contact with the eyes or mouth. Always store fuel in a
clearly marked container and out of the reach of children.
• Gasoline is highly flammable. Keep it away from open
flame, excessive heat, sources of sparks, or anything else
that might ignite it. Do not smoke or allow anyone else
to smoke in close proximity to open fuel containers. Make
sure that fuel lines are in good condition so that fuel will
not leak onto a hot engine causing a fire.
• Never operate your engine in an enclosed space. Model
engines, like automobile engines, exhaust deadly carbon
monoxide. Run your engine only in an open area.
• Use safety glasses when starting or running engines.
The propeller may throw loose material such as sand or
gravel into your face.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the
place of purchase.
The AquaCraft V24 One-Design can be made ready for the
water in just a few minutes. The following sizes of hex keys are
supplied with the V24: 1.5mm, 2mm, 2.5mm, 3mm, and 4mm.
The following items are required to complete assembly:
❏
Adjustable Wrench
❏
Phillips Head Screwdriver
❏
Twelve (12) “AA” Batteries (SANP3500 x 4), eight (8) for
the transmitter, four (4) for the receiver
As with any hobby, it is a good idea to assemble a useful
collection of tools and accessories to bring along
anytime you head out to the pond. Here are some items
you will want to keep handy.
❏
#2 Phillips Screwdriver (HCAR1024)
❏
Hobbico Heavy Duty Diagonal Cutter 7" (HCAR0627)
❏
Pliers (HCAR0625)
❏
Hook & Loop Material (GPMQ4480)
❏
Hobby Knife (HCAR0109)
❏
Fuel Can (with 40:1 gas/oil mixture)
❏
Funnel
❏
Speed Grease Drive Cable Lubricant (HCAB3000) or
Heavy-Duty Marine Grade Cable Grease
❏
WD-40 (Spray-On Water Displacement Solution)
❏
Paper Towels
❏
Spray-On Glass Cleaner
❏
Zip-Ties (BUKC2477)
❏
Extra “AA” Batteries (SANP3510)
❏
Threadlocking Compound (GPMR6060)
❏
After Run Engine Oil (HCAP3000)
❏
Medium CA glue (GPMR6009) and Debonder (GPMR6039)
Other Useful Items to Have On Hand:
❏
Sunglasses
❏
Sun block
❏
Waders or rubber boots
❏
Cooler with plenty of ice and soda
❏
Folding table
❏
Lawn chairs
❏
First-Aid kit
❏
EZ-up or canopy for shelter
BOW: The front of the boat.
STERN: The back of the boat.
PORT: This is the left side of the boat when aboard and
facing the front (bow). An easy way to remember this is that
port and left both contain four letters.
STARBOARD: This is the right side of the boat when aboard
and facing the front (bow).
HULL: The body of the boat.
DECK: The top of the boat.
RUDDER: The hinged vertical plate mounted at the stern
that controls steering.
BOAT TERMINOLOGY
ITEMS REQUIRED FOR COMPLETION
AND OTHER USEFUL TOOLBOX ITEMS
3
