Hobbico AquaCraft V24 One-Design Assembly And Operation Manual Download Page 2

Repair service is available anytime.

After the 90-day warranty, you can still have your V24 One-
Design repaired for a small charge by the experts at
AquaCraft’s authorized repair facility, Hobby Services, at
the address listed on the front page of this manual.

To speed up the repair process, please follow these instructions:

1. Under  ALL circumstances return the ENTIRE system,

boat and radio.

2. Make sure the transmitter is turned off, all batteries

are removed and fuel is drained from the tank.

3. Send written instructions which include a list of all items

returned, a THOROUGH explanation of the problem, the
service needed and your phone number during the day. If
you expect the repair to be covered under warranty, be
sure to include a proof-of-purchase date (your store
receipt or purchase invoice).

4. Also be sure to send your full return address.

Your AquaCraft V24 One-Design features a powerful Fuji

24cc BT- Marine engine covered by Fuji Engines’ standard
3-Year Limited warranty.

SPECIFICATIONS:
Displacement: 23.9cc (1.45 cubic inch)
Horsepower:

3.0HP (2.18kw)

Ignition Style:

Spring-Assisted Recoil Starter

RPM:

4000 - 12,000

Fuel:

Gasoline/Oil mix

Weight:

Approximately 1.4kg w/muffler (3.13 lbs)

Manufactured by FUJI IMVAC INC.

YOKOHAMA, 235-0005 JAPAN

Worldwide Distributor (except Japan): Hobbico, Inc.

Champaign, IL 61826 USA

www.fujiengines.com

Fuji Engines warrants this engine to be free from defects in
materials and workmanship for a period of three (3) years
from the date of purchase. During that period, Fuji Engines
will, at its option, repair or replace without service charge any
engine deemed defective due to those causes. You will be
required to provide proof of purchase date (receipt or invoice).

• This warranty does not cover damage caused by crash,

abuse, misuse, alteration or accident. Damage caused by
customer disassembly, tampering, use of substandard fuel,

use of incorrect accessories (spark plug, prop, etc.) or any
use of the engine for which it is not specifically intended will
automatically void the warranty of the engine. If there is
damage resulting from these causes within the stated
warranty period, Fuji Engines will, at its option, repair or
replace it for a service charge not greater than 50% of the
current retail list price. Be sure to include your daytime
telephone number and e-mail address in case we need to
contact you about your repair.

• Under no circumstances will the purchaser be entitled to

consequential or incidental damages. This warranty gives
you specific legal rights and you may also have other
rights, which vary from state to state.

• If you attempt to disassemble or repair this unit yourself, it

may void the warranty.

• The Fuji BT-24 Marine engine was designed for use in model

boats. Do not attempt to use it for any other purpose.

For service on your Fuji Engines product, either in or out of
warranty, send it post paid and insured to Hobby Services
(address on the front cover).

Along with your engine and proof of purchase date, please
include a complete written explanation detailing the problem(s)
and a phone number that you can be reached at during the
day. State your name and return address clearly. For repairs
not covered under warranty, you must specify whether you
wish the charges to be billed COD or if you wish to be notified
of the charges so you can send a check.

Outside USA and Canada, contact local importer for
warranty information.

All pictures, descriptions, and specifications found in this
instruction manual are subject to change without notice.
AquaCraft and Fuji Engines maintain no responsibility for
inadvertent errors in this manual.

• Adult supervision is strongly recommended! Children

should be warned about the dangers of playing in close
proximity to water.

• This boat is controlled by radio signals, which are

susceptible to possible interference from other R/C
transmitters, paging systems, or other electrical noise.
Before turning your radio transmitter and receiver on,
make sure no one else in the area is operating a radio on
the same frequency (channel).

SAFETY PRECAUTIONS

SPECIFICATION & DESCRIPTION CHANGES

FUJI ENGINES 3-YEAR LIMITED WARRANTY

FOR USA AND CANADA

REPAIR SERVICE

2

Summary of Contents for AquaCraft V24 One-Design

















Reviews: