4
Hobbes LANtest Pro™
Remote Network Cable Tester
@ Copyright Hobbes GmbH
256652A/IDT)
•
Identification of up to 4 remote termination units (available on
model 256652A/IDT)
•
Verification of shield integrity
•
Cross talk detection in excess of 3dB + 0.3dB at 3.5Mhz between
any two pairs
•
Specially designed remote unit that enables one person to test
installed cables
•
Easy to read fault display and high speed testing
•
Debug mode for detailed fault identification results
•
Auto sleep mode and power off switch to decrease power
consumption
Hobbes LANtest Pro™ Specifications
•
Connectors
Hobbes LANtest Pro™ Main Unit – RJ45 jack
Remote Unit – RJ45 jack
•
Pairs tested
1/2, 3/6, 4/5, 7/8 and shield
•
LED display
Horizontal: 5 Green LEDs for pair and shield display
(1-2, 3-6, 4-5, 7-8 and shield)
TONE G. LED (for models 256652AT, 256652A/TK, 256652A/TFK
and 256652A/IDT)
Vertical: 5 Red LEDs for fault display and #ID display
(OPEN, SHORT, REVERSED, MISWIRE, SPLIT PAIRS and LOW BATTERY)
For 256652A/IDT the fault display shares with the #ID display (#1,
#2, #3, #4)
•
Cable test length limit: Min: 0.4m, Max: Over 200m
•
Power: Alkaline 1.5V AAA battery * 4 (optional)
•
Remote identifier: No battery required
•
Dimensions: 125 x 52 x 30 mm (L x W x H)
•
Low battery indicator
www.burntec.com
