26. Remove brine valve from the softener cabinet.
27. The Float Cup is set by adjusting its height
above the bottom of the brine valve assembly.
By removing the brine valve assembly and
resting it on a flat surface, the height of the
Float Cup can be measured with a ruler.
The height is measured from the base of the brine
valve assembly to the top of the float cup.
Salt Alarm Installation
28. To install salt alarm system remove paper lining
from back of salt alarm connector box.
29. Remove plastic lining from Velcro
®
backing
located on back of salt alarm controller.
30. Remove four screws securing back cover to salt
alarm controller.
F25407 (February 2011)
Page 6 of 16
