1. PREASSEMBLY INSTRUCTIONS
1.1 STORAGE AND TRANSPORT
The oven is sent packed on a wooden platform, covered with plastic film, that protects the machine
against humidity and rain.
The oven should be transported in a completely closed vehicle and it should never be left outdoor.
1.2 CONDITIONS FOR USE
•
The oven has been manufactured to be installed indoor. It is not made to work outdoor. Any possible
contact with water has to be avoided.
•
The oven should not be installed in places with excessive heat, steam and/or humidity production.
•
The oven is prepared to work under the following external conditions: -10 <t> 40 ºC (14 <t> 104 ºF),
and 0 <h> 90 % of humidity
•
The room in which the oven has to be installed must have an adequate ventilation. If there is a
fumes extractor, then a window with at least the section of the fumes extractor should be kept open.
•
The position of the oven regarding the side and back wall of the installation premises should have a
minimum distance of 2" (50 mm) between the oven sides and the walls of the room.
VERY IMPORTANT
The base on which the oven is fitted has to be of a nonflammable material and able to withstand a
constant temperature of 300º C (572 ºF) without deteriorating.
