23
hms-fitness.com
STEP 28
DIAGRAM OF THE HIGH PULLEY CABLE
After the machine is assembled, check whether the cable is tensioned. (With correct tensioning, there sho
-
uld be a gap of 3-5mm between the top plate and the stack). If the cable is slightly loose, adjust it by tighte
-
ning the screw at the top of the stack. If the cable is very loose, adjust the line pulley to bottom position
(no. 28).
Unscrew the nut and
threaded screw in
part (14) to adjust
the cable tension.
Loosen the screw of
the nut and thread in
the top plate section to
achieve correct cable
tensioning.