Intesis
TM
Modbus Server
– HITACHI VRF
User Manual r1.0 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
19 / 30
Figure 4.5
Intesis MAPS Scan Hitachi Units window
By pressing
Scan
button, connected Hitachi H-Link bus will be scanned for available units. Error window will appear
if there is a problem in the connection with H-
Link bus (units not powered, bus not connected, …).
A progress bar will appear during the scan, which will take up to a few minutes. After scan is complected, detected
units will be shown in available units as follows:
Figure 4.6
Intesis MAPS Scan Hitachi Units window with scan results
Select with its checkbox units to add (or replace) in installation, according to selection
Replace Units
/
Add Units
.
After units to be integrated are selected, click button
Apply
, and changes will appear in previous
Units
Configuration
window.
