Intesis
TM
ASCII Server
– BACnet Client
User Manual r1.1 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
23 / 28
Figure 5.10
BACnet Explorer showing objects found under a BACnet device
After objects have been discovered, it must be selected both the BACnet devices to be integrated, as well as the signals
of each that are are desired in the project.
Figure 5.11
BACnet Explorer with a selection of objects and devices to integrate
In the example above, if Apply button is pressed, two devices will be integrated:
•
Device INBACSAM---O000(200)
•
Device INASCBAC---0000 (246)
The BACnet objects that will be integrated in configuration are
O01U00_Setpoint_S
and
O01U00_Room_Temperature
for
Device INBACSAM---O000
, and those selected for
Device INASCBAC---0000
(can be seen when device is selected
in the list at the left part of the window).
Next step is to transfer those objects to MAPS configuration. To do so, it must be first selected if those selected objects
are meant to replace the entire configuration (
Replace Devices
– default) or added to existing signals configuration
(
Add Devices
).
