Baterie: 4*AA 1.5V
COMPUTER
Operation
1) Mode key under the LCD Display lets you to select and lock on to a particular function you want(scan
mode,time/speed/distance/calorie/ ODO/RPM/Pulse mode). Reset the data to zero by pressing the MODE KEY for several
seconds.
2) The processor turns off automatically when the speed sensor has no signal input or no key is pressed for approximately 4
minutes.
3) The LCD Display could be activated again by pressing the Mode key or riding the pedals for a circle.
SETTING THE LOAD AND BATTERY
Batteries
1. Remove the battery cover and insert 4 AA 1.5V battery into place at the back of the computer .
2. Pay attention to the polarity ( label located inside the battery compartment ), the battery cover back into position and make
sure it is well secured .
Notice:
-
Used batteries should be replaced immediately
-
Batteries should be replaced at least one year in order to avoid leakage
TERMS OF REFERENCES
Stationary bike exercises are replacing bicycle exercises.
Magnetic bike M4402 is item class H.
Unit is not intended for
commercial use therapy or rehabilitation.
TRAINING INSTRUCTION
1. Warm-Up
To prevent injury and maximize performance we recommend that each workout period starts with a warm-up. We suggest you do the
following exercise as the sketch map. Each exercise at least about 30 seconds.
Baterie: 4ks AA 1.5V
8 Adjustable resistance
Level: ”+”direction to
increase the resistance,
”-”
direction to reduce the
resistance.
