L. LOADING Profiles: There are 10 columns of loading bars, and 8 bars in each column. Each
column represents 3 minutes workout (without the change of TIME value), and each bar
represents 2 levels of loading.
Operating Ganges
Values
Range (Count up) Count down
Preset Increment (Decrement)
PROGRAM
1 ~ 17
17 ~ 1
1
1
LEVEL
1 ~ 16
16 ~ 1
N/A
1
GENDER
Male, Female
N/A
Male
N/A
TIME
0:00 ~ 99:59
99:00 ~ 5:00
0:00
1:00
HEIGHT (cm)
110.0 ~ 199.5
199.5 ~ 110.0 175.0
0.5
WEIGHT (kg)
10.0 ~ 199.8
199.8 ~ 10.0
70.0
0.2
DISTANCE
0.0 ~ 999.0
999.0 ~ 1.0
0.0
1.0
WATT
30 ~ 300
300 ~ 30
100
10
TARGET H.R.
60 ~ 220
220 ~ 60
90
1
AGE
10 ~ 99
99 ~ 10
30
1
Things You Should Know Before Exercising
A. The values calculated or measured by the computer are for exercise purpose only,
not for
medical purpose
.
B. The Variables May Need To Change In The Programs:
Programs
Variables
P1 ~ P7
TIME, DISTANCE, AGE
P8
GENDER, HEIGHT, WEIGHT, AGE
P9
TIME, DISTANCE, TARGET H.R.
P10 ~ P12
TIME, DISTANCE, AGE
P13 ~ P16
TIME, DISTANCE, AGE, 10 Intervals
P17
TIME, DISTANCE, WATT, AGE
Please note that only 1 value of TIME or DISTANCE can be adjusted. Both adjustments do not
exist at the same time. For example, the
value of DISTůNCź is “0.0” while the value of TIMź is
adjusted to be any number except “00Ś00”.
C. Programs Selection:
There are 17 programs with 1 Recovery including 1 Manual Program, 6 Preset Programs, 1 Body
Fat Program, 4 Heart Rate Control Programs, 4 User Setting Programs, 1 Speed Independent
Program, and 1 Pulse Recovery Measuring.
D. Program Graph:
Each graph shown is the profile of the loading in each interval (column). With the value of TIME
counting up, each interval is 3 minutes that all the columns make up 30 minutes. With the value
of TIME counting down, each interval is the value of setup TIME divided by 10. For example, if
the time value is setup to 40 minutes, each interval will be 40 minutes divided by 10 intervals
(40/10=4). Then, each interval will be 4 minutes. The following graphs are all the profiles in the
monitor.
Program 1 (Manual)
Program 2 (Polling)
