Possible mistakes
Problem
Reason
Solution
Treadmill didn’t work
1. no power
1. plug into socket
2. safety key isn’t in the right
position
2. replace the safety key
3. broken circuit signall system
3. check the product
4. fuce burnt out
4. change the fuse
The running belt doesn’t run
smoothlu
1. no enought lubrication
1. use the silicone oil
2. running belt i stoo tight
2. adjust the tightness of running belt
Running belt slips
1. running belt i stoo loose
1. adjust the tightness of running belt
2. motor belt i stoo loose
2. adjust the tightness of motor belt
The key malfunction
1. boken panel
1. change the key board and wire 2.
Change the mainboard 3. Change the
console
Stop abruptly under normal
state
1. safety key drop out
1. replace the safety key
2. broken system
2. ask serviceman to repair it
E1
1. connect wire loose or defected
1. connect the wire well or change the
wire between console and controller
E3
1. motor wire lose or defercted or
controller defected
1. connect the motor wire well or
change the controller
2. speed sensor not pull well or
defected
2. put the soeed sensor well or change
the speed sensor
E4
1. Incline motor induction wire is
not put well put
1. Put the induction wire well
2. Incline motor AC wire not put
correctly
2. AC wire match to the logo on the
controller
E5
1.
Overloading and some part
are locked
1.
Adjust the treadmill and start it
again
2.
Motor and controller defected
2.
Change the motor and controller
3.
Power and voltage is not
conformity or is too low.
3. Test again for correct voltage.
E6
1.
Voltage is lower 50
%
than
normal voltage.
1.
Test again for correct voltage
2.
Controller defected
2.
Change the controller
3.
Motor connect wire not put
well
3.
Well put motor connect wire
No pulse
1.
Handle pulse wire did not
connect well or wire defected
1.
Well connect the wire or
change the wire
2.
Console circuitry defected
2.
Change the console
Console short of display
1.
The screw on the PCB is loose
1.
Tight well the screw
2.
Console defected
2.
Change the console
Summary of Contents for BE5833
Page 1: ...BE5833...
Page 70: ......