Intesis
TM
KNX
– Mitsubishi Heavy Industries AC
User’s Manual r1.2 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
22 / 26
Setup process and troubleshooting
Pre-requisites
It is necessary to have the KNX bus operative and well connected to the KNX port of
Intesis
TM
.
Connectors, connection cables, PC for LinkBoxEIB, and other auxiliary material, if needed,
are not supplied by HMS Networks for this standard integration. Items supplied by HMS
Networks for this integration are:
•
Intesis
TM
KNX device with full Mitsubishi Heavy Industries AC compatibility without
extra components.
•
Standard plug-in 220Vac 50Hz power supply to power Intesis
TM
(European plug
type).
•
Access to LinkBoxEIB software download site to configure Intesis
TM
.
•
Console cable needed to download the configuration to Intesis
TM
.
•
Product documentation.
Setup
procedure
1.
Install LinkBoxEIB on your laptop, use the setup program supplied for this and follow the
instructions given by the Installation Wizard.
2.
Install Intesis
TM
in the desired installation site. For your convenience, check external
enclosure measures (see 7) before deciding where to place the Intesis
TM
device.
3.
Connect the communication cable coming from the KNX bus to the Intesis
TM
KNX port
(See 3 for more information on connection procedure).
4.
Connect the Superlink network cable to the Intesis
TM
port marked as AB (see 3.1).
5.
Select the appropriate Superlink mode in the SLK selector. If you are using latest Air
Conditioner of the Mitsubishi Heavy Industries network select NEW, if not select OLD.
Contact your nearest Mitsubishi Heavy Industries supplier in case of doubt.
6.
Connect the Intesis
TM
device to the power line (see 3.4) and press the On/Off button to
turn it on.
7.
Connect the communication cable coming from the serial port of your laptop/desktop PC
to the Intesis
TM
port marked as EIA232 Console (see 3.3).
8.
Open LinkBoxEIB and proceed as explained in section 4.
Troubleshooting
If Intesis
TM
is not working properly or even not working at all, please check the following
conditions to be accomplished.
6.3.1
Physical checking
First point to look at to make sure that Intesis
TM
is not working properly is to check physical
connections:
1.- Make sure that the power plug is correctly connected and current is available in
the power line.
