HMS Networks Intesis IN701-KNX Series User Manual Download | Manualshive

Page: 46 / 48

background image

16.2.7. Diagnostic

IMPORTANT

Connection with the gateway is required to use the diagnostic tools.

Figure 12. Diagnostic tab window. Find the ToolBox between the upper tabs bar and the Console view. Below it,

from left to right: Console viewer, Protocol viewers (one above the other), and the Signals viewer

This section has two main parts:

ToolBox

Use the tools section to:
• Check the current hardware status of the gateway.
• Save communication logs to a ZIP file for diagnostic purposes.
• Get information on the gateway.
• Reset the gateway.

Viewers

Intesis MAPS provides several viewers:
• A generic console viewer for general information about communications and the gateway status.
• A viewer for both protocols to check their current status.
• A signals viewers to simulate the BMS behavior or check the system's current values.

IN701-KNX Series

Intesis MAPS: Configuration and Monitoring Tool

Page 42 of 44

USER MANUAL Version 1.0

«
...
44
45
46
47
48
»

Summary of Contents for Intesis IN701-KNX Series

















































Reviews:

No comments

Related manuals for Intesis IN701-KNX Series

Brand: TempAlert Pages: 22

Brand: Farfisa Pages: 12

Brand: EchoLife Pages: 16

Brand: Yeastar Technology Pages: 15

P-873HNU(B)-51B

Brand: ZyXEL Communications Pages: 12

Brand: Smartenit Pages: 2

Brand: Burkert Pages: 13

Brand: ViewSonic Pages: 65

Brand: VOPtel Pages: 38

Brand: VOPtel Pages: 49

Brand: QEI Pages: 47

Brand: Planet Networking & Communication Pages: 61

Brand: 2Wire Pages: 131

Brand: ZyXEL Communications Pages: 2

Brand: Owon Pages: 8

TotalStorage NAS Gateway 500

Brand: IBM Pages: 471

Lucent Network Gateway

Brand: Lucent Technologies Pages: 2

Brand: Technoton Pages: 69

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands