User guide for Shower/Commode chair M2 Mini El-Tip.
Intented for use a bathing, showering and toilet visit.
(2/5)
Assembly of wheels:
Lay down the chair. Take the clips out of the leg
and inser the wheels into the frame. Make sure
that all 4 wheels are in the same height position
before inserting the clips.
Turn the chair over for easier assembly of the
wheels.
Mounting the back:
Attach the back into the frame.
Assembly the back:
Insert the 4 screws and tighten with an Allen
wrench. Make sure that all 4 screws are securely
tightened.
Remember to retighten the screws after a month.
The screw shall be discarded after the mounting
and you shall use the screws to the next mounting.
(Art. No 800290)
Mounting/Disassembly of armrest
Pull the snap release and then you can tilt the
armrest.
Adjustment of armrests
The height of the armrest are adjusted by
loosening the umbraco screw and then moving
the armrest to the wished height and then
tightening the screw again.
Looking the wheels:
Before use of the chair bathing, showering or lifting
persons into the chair, make sure that all 4 wheels are
locked.
To lock the chair, press down the grey plate as shown
on the picture to the left.
Mounting the footrests:
Adjust the height of the footrests by taking the clips
out, placing the footrests in the wished position
and putting the clips back in.
Footrests are to be placed on the front of the frame
in the footrests holders.
Continued on page 3
