HME 800.919.9903 ServerCall ® Paging System
Page 7
©HME WIRELESS, INC. 2012
At the “
Set Pager Alert
” menu, press the “
ENTER
” key to go to “
Set Pager Alert”
configuration menu.
Press the “
2X
” or
“3X”
key to scroll through the different alert options.
After making a selection,
press the “
ENTER
” key 4 times. After sending the code,
the pagers will now respond with your new selection.
Press the
“CANCEL
” key to exit the system programming menu
Return all the pagers to the charging base or plug the power supply back in. The
pagers are ready to receive the page with the new alert.
6.
Setting the “Out of Range”
(Factory Default: OFF) For rechargeable pagers only.
With this feature, the pagers will play a melody when taken out of range of the
transmitter to inform the server/employee that they are too far away or forgot to return
their pager. The melody will automatically stop when they step back within range.
Be
sure that all pagers are returned before turning the out of range feature on or off.
TURNING THE OUT OF RANGE ON
Remove all the pagers from the charging unit or unplug the power supply that is
connected to the first charging rack.
Press the “
ENTER
” key to go to “
Out of Range
” configuration menu.
At the “Out of Range” menu, press the “
2X
” or “
3X”
key to turn the out of range ON.
Press the “
ENTER”
key 4 times. After sending the signal, all the pagers will light up
once to tell you that they received the new code.
Press “
CANCEL
” key to exit the system programming menu.
Return all the pagers to the charging base or plug the power supply back in. The
pagers are ready to receive the page with the out of range on.
TURNING THE OUT OF RANGE OFF
Remove all the pagers from the charging unit or unplug the power supply that is
connected to the charging racks.
Press the
ENTER
” key to go to “
Out of Range
” configuration menu.
At the “Out of Range” menu, press the “
2X
” or “
3X”
key to turn the out of range OFF.
Press the “
ENTER”
key 4 times. After sending the signal, all the pagers will light up
once to tell you that they received the new code.
Press “
CANCEL
” key to exit the system programming menu.
Return all the pagers to the charging base or plug the power supply back in. The
pagers are ready to receive the page with the out of range off.
7. Transition Page
(Default: 30 sec) The tr
ansition page is the time between “re-pages”
should your staff be tardy in picking up their food.
You may set your system to page in the following ways:
1. Page once and then reset. (Transition OFF)
2. Page three times and then reset
3. Page three times and page the manager with the server number (this option
requires someone to clear the page by pressing the button again).
