HME ServerCall User Manual Download Page 11

 

HME 800.919.9903                                                               ServerCall ® Paging System 

  

        

                        Page 11 

©HME WIRELESS, INC. 2012 

 
 

FCC Licensing Information (Applies only to users in the United 
States)

 

HME Wireless paging systems operate on radio frequencies that are regulated by the Federal  
Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a 
license issued by the FCC. 

Under current FCC policy, 

you may operate the equipment under HME Wireless’ FCC license described 

below: 

Licensee: HME Wireless Inc. 

Call Sign: WQKJ800 

Area of operation: United States nationwide, including Hawaii and Alaska, and United States Territories 

Frequencies (MHz): 457.525, 457.550, 457.575, 457.600, 467.875, 467.900, 467.925 

Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 

If you require a copy of the license, you can contact HME Wireless or obtain one from the FCC web site 
(

www.fcc.gov

). You may, however, want to apply for your own FCC license. Whether you use HME 

Wireless’ FCC license or obtain your own, you are responsible for complying with the FCC rules and 
requirements applicable to the HME Wireless paging system, particularly those that deal with private land 
mobile radio services. See 47 CFR Part 90. 

Changes or modifications not expressly approved by HME Wireless 

may void the user’s authority granted 

by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter 
adjustments should be made only by or under the supervision of a person certified as technically qualified 
to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by 
an organization representative of the user of those services. Replacement of any transmitter component 
(crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could 
violate FCC rules. 

International Licensing Information (Applies to users outside the 
United States)

 

HME Wireless paging and radio systems operate on radio frequencies that are regulated by international 
treaties. In order to transmit on these frequencies, you are required to have a license issued by the 
licensing authority in the country of operation. To obtain information on licensing, you should contact the 
relevant licensing authority in the country in which you are operating. 

Note:

 Use of these products outside the country where it was intended to be distributed is subject to local 

government regulations and may be prohibited. 

 

Summary of Contents for ServerCall














Reviews: