HME JTECH Staffcall IQ Paging, User Manual

Page: 3 / 7

User Manual
3
800.321.6221
Staffcall IQ Pagers
Model Number: STFIQ
System Configurations
System Default Configuration
The paging system was set to default settings listed below prior to shipment.

Current time is set.

Out of Range is set to OFF
To enter programming mode, on the transmitter, press “ SETUP ” , use password “ 1379 ” and press “ ENTER ” .
Use the “ */MENU ” button to scroll and the “ #/SELECT ” button to choose the menu option.
Once you have saved your changes, press “ CANCEL ” until you return to the main Pager Number screen.
Set Current Time
1. At the “ Set Current Time ” menu, press the “ ENTER ” key.
2. Set the hour, then press the “ ENTER ” key.
3. Set the minutes, then press the “ ENTER ” key.
4. Use “ 1 or 2 ” key to select AM or PM, then press the “ ENTER ” key.
5. After the correct time is set, press the “ ENTER ” key to accept. Press the “ CANCEL ” key to exit the system
programming menu.
Set Sleep Timer
This system has an “ALL SLEEP” function that turns off all battery pagers (for example, manager pagers) at once
automatically.
To turn Sleep Timer “ ON ”, follow the procedure below:
1. At the “ Set Sleep Time ” menu, press the “ #/Select ” key to turn the sleep shutdown to “ ON ”.
2. Press the “ ENTER ” key to accept the change.
3. Press the “ CANCEL ” key twice to exit out of the menu.
Change Shutdown Time
1. At the sleep shutdown menu, press the “ #/Select ” key to turn the sleep shutdown to “ ON ”.
2. Press the “ ENTER ” key.
3. Set the hour then press the “ ENTER ” key.
4. Set the minutes and press the “ ENTER ” key. Use the “ 1 or 2 ” key to select AM or PM and then press the
“ ENTER ” key. After the correct time is set, press the “ ENTER ” key to save. Press the “ CANCEL ” key to exit the
system programming menu.
To turn Sleep Timer “ OFF ”, follow the procedure below:
1. At the “ Set Sleep Time ” menu, press the “ #/Select ” key to turn preset messages from “ ON ” to “ OFF ”