User Manual
2
800.321.6221
Staffcall IQ Pagers
Model Number: STFIQ
Components
Your StaffCall
®
paging system is comprised of three key elements:
The JTECH Desktop Transmitter
o
Applies to models: ISTATION
The Staffcall IQ Pagers
The Staffcall IQ Charger
Quick Setup
Lock the antenna to the connector on the transmitter by placing the antenna on the connector and twisting
left to lock in place.
Plug the power supply into the transmitter and then into a standard 110-240v outlet.
A surge protector is
recommended.
Compile charger bases and plug charger power supply into charger and then into a standard outlet.
Surge
protection is recommended for charging bases.
Add pagers to charger slots. You will see a RED light on each pager. This light indicates the charging status.
System Use
Distributing a Pager
Remove a Staffcall IQ pager from the charger.
The pager will vibrate to preview what the alert will look like for the staff.
Hand the pager to the guest, stating that the pager will go off with they have been paged.
Paging a Staff member
To page a staff member, enter the 1 to 3-digit pager number into the transmitter and press SEND.
The pager will alert until it is returned to the charger.
