HME ion BP COM6100 Operating Instructions Manual Download Page 7

 

If you have any problems registering COMMUNICATOR

®

s –  

In the USA, call HME Technical Support at 1-800-848-4468. 

 Outside the USA, call your local HME representative for assistance. 

 

 

Waste Electrical and Electronic Equipment (WEEE) 

The European Union (EU) WEEE Directive (2002/96/EC) places an obligation on producers (manufacturers, distributors 
and/or retailers) to take-back electronic products at the end of their useful life.  The WEEE Directive covers most HME 
products being sold into the EU as of August 13, 2005.  Manufacturers, distributors and retailers are obliged to finance the 
costs of recovery from municipal collection points, reuse, and recycling of specified percentages per the WEEE requirements. 

Instructions for Disposal of WEEE by Users in the European Union 

The symbol shown below is on the product or on its packaging which indicates that this product was put on the market after 
August 13, 2005 and must not be disposed of with other waste.  Instead, it is the user’s responsibility to dispose of the user’s 
waste equipment by handing it over to a designated collection point for the recycling of WEEE.  The separate collection and 
recycling of waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a 
manner that protects human health and the environment.  For more information about where you can drop off your waste 
equipment for recycling, please contact your local authority, your household waste disposal service or the seller from whom you 
purchased the product. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for ion BP COM6100








Reviews: