4
OPERATION
Wearing the COMMUNICATOR
®
Clip the Belt-Pac on your belt
Plug the headset cable into the belt-pac, and
clip the belt-pac on your belt or waist band.
NOTE:
You do not need to remove the pouch
to insert or remove the headset cable connector.
Adjust the Headset to your head size
You can adjust the head size of the headset for best fit
by sliding the metal headband in or out of the plastic
size adjuster, as show in Figure 6.
Put the Headset on your head
•
•
•
•
The headset can be worn with the
microphone on either side of your head.
•
•
•
•
Put the headset on your head with its cable
behind your back and attach the clothing clips
to your collar and shirt to keep the cable
safely behind you, as shown in Figure 7.
•
•
•
•
Hold the microphone boom at its base and
adjust it so the microphone is near the side of
your mouth.
Changing Batteries
If you hear “Battery low” or “Change battery”
─
•
•
•
•
Press the RELEASE BATTERY button on the belt
clip of the pouch, and use your thumb to slide the
battery from the belt-pac.
•
•
•
•
Place the battery in the battery charger for
recharging.
•
•
•
•
Install a fully charged battery in the belt-pac.
NOTE:
You do not need to remove the pouch
to remove or insert the battery.
Hold microphone
boom here to adjust
microphone position
Clothing clip
Figure 7. Correct wearing of headset
Headset
cable plug
Belt clip
Figure 5. Belt-pac and cable
Metal
headband
Size
adjuster
Slide
Figure 6. Headset adjustment
Battery
RELEASE
BATTERY
button
Figure 8. Battery removal
