FCC Disclaimer:
One Year Limited Warranty:
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by HMDX could void the user's
authority to operate the equipment.
For detailed Warranty Instructions and Information visit:
http://www.hmdxaudio.com/products/jam-wireless-portable-speaker.html
To obtain warranty service on your HMDX product, contact a Consumer Relations
Representative by telephone at 1-800-753-3000 or email [email protected]
for assistance. Please make sure to have the model number of the product available.
Representatives are available 8:30am - 7:00pm EST Monday-Friday.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
• WARNING: Do not place speakers too close to ears. May cause damage to ear
drums, especially in young children.
• Use this product only for its intended use as described in this manual. Do not
use attachments not recommended by HMDX.
• HMDX is not liable for any damage caused to Smartphones, iPod/MP3 player or any
other device.
• Do not place or store this product where it can fall or be dropped into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water or cleaning
solvents.
Por manual de instrucciones e Información de garantía en español visítenos
en www.hmdxaudio.com
HMDX Jam and HMDX are trademarks of HMDX.
©2013 HMDX. All Rights Reserved.
IB-HXP240
1. Connect Aux cable to the headphone or Line-Out Jack of an
audio device and plug the other end of the cable into the
Line-In Audio Jack on the back of the unit.
2. Press and hold the power buttons to turn on the unit.
3. Press PLAY on the device and use controls on the unit to adjust
desired volume.
4. Speakers will begin to pair together automatically.
NOTE:
• Play/pause controls on Jam Plus will not work when using Line-In
Audio Jack.
• To clear the pairing history, press the play/pause button and the
power button simultaneously for 5 seconds.
• In the event the speaker controls are not operable, press reset on the
bottom of the unit to reset the speaker.
Listening to your device through the Auxiliary
Line-In Audio Jack
Only use a soft dry cloth to clean the enclosure of the unit.
NEVER use liquids or abrasive cleaner to clean.
Maintenance
7. Follow the instructions of your device to pair the unit.
8. Pair your device with the unit by selecting Jam
2
from your
Bluetooth
®
listings on your device or selecting YES.
NOTE:
• If you do not see Jam2 as an option on your device, you may have
only paired 1 speaker. Turn off both units and repeat steps 1-8.
• You cannot pair more than one set of Jam Plus speakers together.
• If you are using two Jam Plus speakers in Stereo (Jam
2
Mode), in order
to use them in Mono mode, turn off the unit and move the switch on
the bottom to the center Mono position.
• When 2 Jam Plus speakers are paired in Stereo (Jam
2
Mode), and you
turn off 1 speaker, the 2nd speaker will turn off automatically.
• For balancing the volume level on the speakers, maximize volume
on both units and control volume through device.
If you experience connection issues or distortion when pairing 2
Jam Plus speakers please follow the below steps:
1. Turn power “OFF” on both Jam Plus units.
2. Turn power “ON” on both Jam Plus units.
3. Speakers will begin to pair together automatically. Wait for pairing
to complete.
4. Pair the units again to your device.
