WIRELESS
SPEAKER
PLUS
PLUS
Por manual de instrucciones e
información de garantía en español
visítenos en www.hmdxaudio.com
Thank you for spreading the
Jam and purchasing the
HMDX Jam Plus Wireless
Speaker. Be sure to check
out the entire JAM product
line on our website:
www.hmdxaudio.com —
Where there’s a Jam
there’s a party!
Approximately 3 hours required for full charge. Can be charged
by using the USB to Micro USB cord (included) through computer
or AC adapter with USB jack (not included).
Note: Battery will last up to 4 hours when connected wirelessly.
Package Contents
User Manual
Charging Cord
Jam Plus
Charging the Unit
Indicators
Solid Red
Note: When unit is fully charged
Red light will be off.
Charging
Low Battery
Slow Blinking
Red
Status
Battery
Indicator
Quickly Flashes BLUE Pairing Mode
Paired
Line-In Mode
Slowly Flashes BLUE
RED
Status
Bluetooth
Indicator
Controls
Power Button
Speaker Mode Switch
Charging Port
Line-In Audio Jack
Battery Status Indicator
Volume Down
Play/Pause Button
Volume Up
Bluetooth
®
Indicator
Jam
2
1
2
3
4
5
6
7
8
9
10
To pair 2 Jam Plus speakers together for stereo sound please follow
the below steps:
1. Turn 1 speaker over and move the speaker mode switch to L.
2. Turn the other speaker over and move the speaker mode switch to R.
3. Press and hold power button for 5 seconds on one speaker.
4. Press and hold power button for 5 seconds on other speaker.
5. Speakers will begin to pair together automatically.
6. Paring process can take up to 30 seconds — once you hear the
steel drum tone and the Jam
2
indicator light begins to slowly flash,
you may pair to your device.
Pairing 2 Jam Plus speakers together (Stereo)
To listen to your music over Bluetooth
®
wireless connection, you need
to pair your device with Jam Plus:
1. Make sure your device has Bluetooth
®
capability.
2. Press and hold power button for 5 seconds; indicator will begin
to flash.
3. Follow the instructions of your device to pair the unit.
4. Pair your device with the unit by selecting JAM PLUS from your
Bluetooth
®
listings on your device or selecting YES.
5. Press play on your device and use controls on the unit to adjust
desired volume.
NOTE:
• Once you have successfully paired your device, you may not need
to repeat the above steps. Please ensure the AUX cable is unplugged
and your device has been Bluetooth
®
enabled.
• When using only one Jam Plus, make sure that the switch is set to
Mono. You will not be able to pair with the speaker if it is set to
“L” or “R”.
• When pairing with a computer, please consult your computer
manufacturer for Bluetooth
®
pairing instructions and/or the latest
Bluetooth
®
Drivers.
• A pairing code is not required.
Pairing a Single Jam Plus Speaker (Mono)
HX-P240
Instruction Manual
and Warranty
Information
L – M
ONO – R
1
2
3
4
5 6 7
8 9
10
