COMING CLEAN
LOOK MA, NO HANDS!
BLUETOOTH
®
CONNECTION, CONTINUED
Depending on your device, you may be prompted to enter a pairing code.
If prompted, enter “0000” as the code.
Note: If you turn on your Bold earbuds but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
A soft, dry towel is all you need to clean off your earbuds. Using water, harsh cleaners, or anything else only starts messing with
the mechanics inside.
When friends call to interrupt your party of one — and you know
they will — answer the phone without disconnecting from your
HMDX Bold. Yes, that’s right. Your earbuds have hands-free
calling, too. How amazing is that? Here’s how it works:
1. Make sure your phone and earbuds are connected through
Bluetooth
.
2. Answering and ending a call works the same way: simply click
the PLAY/PAUSE button on your Bold.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on
your Craze for 3 seconds to ignore the call.
THE COOLEST PART: The Bold earbuds know when a call is
coming in and pauses the music before ringing. When you hang
up, the music starts where it left off — and so does the party. If
it’s you making the call, just start dialing from your phone, and
the Bold automatically does its hands-free thing. Isn’t it refresh-
ing to know your earbuds totally get you?
Situation
Short Press Play/Pause Button
Long Press Play/Pause Button
1
st
Incoming call
On call
Pick up call
End call
Reject call
Move call from
headphone to device
Check out the chart below for a complete guide on handling calls with your HMDX Bold.
1 YEAR LIMITED WARRANTY
STUFF THE GOVERNMENT MAKES US SAY
FCC Disclaimer:
Note: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
For detailed warranty instructions and information visit:
USA:
www.hmdxaudio.com/customer-support/warranty-1yr
CAN:
www.hmdxaudio.ca/warranty-1yr
To obtain warranty service on your HMDX product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by HMDX could
void the user's authority to operate this equipment.
IC Caution: RSS-GEN Issue 4 November 2014
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
2m
