English
Noise Canceling Headphones
WARNING
The validity of the CE marking is restricted to only those
countries where it is legally enforced, mainly in the countries
EEA (European Economic Area).
The device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Note
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and
receiver.
–
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
–
Consult the dealer or an experienced radio/TV technician
for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
Using the AI Noise
Canceling function
The AI Noise Canceling function analyzes environmental
ambient sound components and automatically selects the
most effective noise canceling mode.
When you press the AINC button while the POWER switch
is set to “ON,” beep sounds and the headphones start the
analysis. During the analysis (approx. 3 seconds), the POWER
indicator blinks, and the volume level is reduced from the
headphones.
When the analysis is completed, the most effective noise
canceling mode is selected and the volume level is revert to
the previous level.
Noise canceling mode types
NC Mode A: Noise mainly in an airplane is effectively
reduced.
NC Mode B: Noise mainly in a bus or a train is effectively
reduced.
NC Mode C: Noise mainly found in an office environment
(PC, copier, air ventilation, etc.) is effectively
reduced.
Tips
–
When the headphones are turned on, NC Mode A is set.
–
Press the AINC button again to reset the noise canceling
mode if ambient noise has changed, such as when you
move outdoors from a room.
Beep sound and
indicator status
Status/Function
Beep sound
POWER indicator
Power off
No beep
Lights off
Power on
Beep once
Lights on
AINC
Beep twice
Blinks twice
Low battery
Long beep
(2 seconds)
Blinks quickly
(30 seconds)
Notes on use
What is noise canceling?
The noise canceling circuit actually senses outside noise
with built-in microphones and sends an equal-but-opposite
canceling signal to the headphones.
Notes on the noise canceling function
–
Adjust the earpads so that they cover your ears, otherwise
noise canceling will not function properly.
–
The noise canceling effect may vary depending on how
you wear the headphones.
–
Do not cover the microphone of the headphones with
your hands. The noise canceling function may not work
properly.
Microphone
After you turn on the power of the headphones, you may
hear a slight hiss. This is the operating sound of the noise
canceling function, not a malfunction.
–
The noise canceling function works for noise in the low
frequency band primarily. Although noise is reduced, it is
not canceled completely.
–
The noise canceling effect may not be pronounced in a
very quiet environment, or some noise may be heard.
–
When you use the headphones in a train or a car, noise
may occur depending on street conditions.
–
Howling may occur if you do not wear the headphones
correctly.
–
Howling may occur if you place an object such as finger
close to inside of the headphones. Keep it away from the
headphones.
–
Mobile phones may cause interference and noise. Should
this occur, locate the headphones further away from the
mobile phone.
Notes on using on the airplane
Do not use the headphones when use of electronic
equipment is prohibited or when use of personal
headphones for in-flight entertainment services is
prohibited.
Notes on handling
–
To disconnect the cord, pull it out by the plug, not the
cord. Otherwise the cord may break.
–
When connecting the cord, make sure to fully insert the
plug. If the plug is not fully inserted, no sound may result.
–
Because of the difference in pin configuration of four-
conductor stereo mini plugs, some smartphones cannot
be used with the headphones.
–
Because the headphones are designed to fit closely in your
ears, forcing them against your ears may result in eardrum
damage. Avoid using the headphones where they are
liable to be struck by people or other objects, such as a
ball, etc.
–
Pressing the headphones against your ears may produce a
diaphragm click sound. This is not a malfunction.
–
Clean the headphones with a soft dry cloth.
–
Do not leave the plug dirty otherwise the sound may be
distorted.
–
Be sure to consult a Sony dealer when the earpads
become dirty or damaged, or when the headphones
require repair work.
–
Do not leave the headphones in a location subject to
direct sunlight, heat or moisture.
–
Do not subject the headphones to excessive shock.
–
Handle the driver units carefully.
–
If you feel drowsy or sick while using this headphones,
stop use immediately.
Notes on headphones
High volume may affect your hearing. For traffic
safety, do not use while driving or cycling.
As headphones reduce outside sounds, they may cause a
traffic accident. Also, avoid listening with your headphones
in situations where hearing must not be impaired, for
example, a railroad crossing, a construction site, etc.
Note on static electricity
In particularly dry air conditions, noise or sound skipping
may occur, or mild tingling may be felt on your ears. This is a
result of static electricity accumulated in the body, and not a
malfunction of the headphones.
The effect can be minimized by wearing clothes made from
natural materials.
If you have any questions or problems concerning the
system that are not covered in this manual, please consult
the nearest Sony dealer.
An optional smartphone cable with microphone is
available for purchase from Sony Support. Please call
Sony Support at (239) 245-6362 and request part number
1-846-728-11 for more information.
Troubleshooting
No sound
–
Replace the battery with a new one.
You can use the headphones even without turning on the
power. In this case, the noise canceling function, Digital
Equalizer and S-Master are not active, and the headphones
operate as passive headphones.
–
Check the connection of the headphones and the
equipment.
–
Check that the connected equipment is turned on.
–
Turn up the volume of the connected equipment.
The noise canceling effect is not sufficient
–
The noise canceling function is effective in low frequency
ranges such as airplanes, trains, or offices (near air-
conditioning, etc.) and is not as effective for higher
frequencies, such as human voices.
–
Turn on the headphones.
Distorted sound
–
Turn down the volume of the connected equipment.
Power does not turn on or the headphones
do not operate properly
–
Check if the battery has expired (the POWER indicator
lights off) and the battery is inserted in the correct
orientation. Replace the battery with a new one or reinsert
the battery in the correct orientation.
No operation works
–
Set the POWER switch of the headphones to “OFF”,
confirm the connections, and then set the POWER switch
back to “ON”.
Features
–
Digital noise canceling headphones with Sony’s unique
DNC software Engine and Dual Noise Sensor Technology:
High precision canceling signal generated by digital signal
processing and microphones located both inside and
outside the housings enables outstanding noise canceling
performance.
–
Automatic AI (Artificial Intelligence) Noise Canceling
function
–
Automatic selection of the optimal noise canceling mode
based on intelligent analysis of environmental ambient
noise.
–
Digital Equalizer and full digital S-Master amplifier :
Delivers ideal frequency response and high-quality music
reproduction with full digital processing.
–
Enfolding structure : Pressure-relieving cushions, tailored
for the ears, provide a wrap-around feel with acoustic
sealing to deliver powerful lows.
–
Lasting comfort : The lightweight and super soft cushions
allow for comfortable wearing over a long time.
–
Detachable cord : 3.5 mm connecting cord
–
Specifications
General
Type
Closed, dynamic
Driver units
40 mm, dome type (CCAW adopted)
Power handling capacity
100 mW
Impedance
50 Ω at 1 kHz (when the power is on)
24 Ω at 1 kHz (when the power is off)
Sensitivity
101 dB/mW (when the power is on)
100 dB/mW (when the power is off)
Frequency response
6 Hz – 24,000 Hz
Total Noise Suppression Ratio
1)
Approx. 22 dB
2)
Power source
DC 1.5 V, 1 × LR03 (size AAA) battery
Mass
Approx. 205 g (7.3 oz) including battery,
not including cord
Battery life
Battery
Approx. hours
3)
Sony alkaline battery
LR03 SIZE AAA
20 hours
4)
Note
The supplied battery was included in the package during
manufacturing (as a convenience to the user), it is possible
that the battery life may be depleted by the time of
purchase. The actual life of the supplied battery may be
shorter than the standard time described in this manual
when using a fresh battery.
When the battery is low
Replace the battery with a new one when the POWER
indicator blinks quickly or lights off.
Included items
Headphones (1)
Connecting cord (1.5 m (59 1/8 in), gold plated L-shaped
stereo mini plug) (1)
AAA battery (1)
Plug adaptor for in-flight use
5)
(1)
Carrying case (1)
Operating Instructions (1)
Warranty card (USA) (1)
Warranty card (Canada) (1)
1)
Under the Sony measurement standard.
2)
Equivalent to approx. 99.4% reduction of energy of sound
compared with not wearing headphones.
3)
At 1 kHz, 0.1 mW + 0.1 mW output
4)
Time stated above may vary, depending on the
temperature or conditions of use.
5)
May not be compatible with some in-flight entertainment
services.
Design and specifications are subject to change without
notice.
Noise Canceling
Headphones
Operating Instructions
Manual de instrucciones
US
ES
MDR-10RDC
1
2
How to use/Modo de uso
Installing a battery/Colocación de la pila
Connecting
Conexión
4
Wearing
Colocación
After use
Turn off the power of the headphones.
Después del uso
Apague los auriculares.
indication
Indicación
indication
Indicación
Tactile dot (on the left)
Punto táctil (a la izquierda)
Connecting cord
Cable conector
Digital music player, etc.
Reproductor digital, etc.
3
Turning on the power
Encendido
Using the AINC function
Uso de la función de inteligencia artificial
de supresión de ruido
© 2013 Sony Corporation Printed in USA
