HM Machinery HM SBM-32F, Manual, Page: 12 / 70

3. TEST REPORT
No. Checking items Inspection item Tolerance Data
G1 Flatness of table and
base
0.12
G2 Spindle taper run out
a. At the end of spindle
nose
b. At the end of 200mm
test bar
a.0.03
b.0.06
G3 Verticality of spindle
center line to table
a. Transverse direction
b. Longitudinal direction
a.0.10/300
(
α
≤ 90°)
b.0.10/300
G4 Verticality of spindle
sleeve vertical travel to
table
a. Transverse direction
b. Longitudinal direction
a.0.10/150
(
α
≤ 90°)
b.0.10/150