-2-
SPECIFICATIONS
Type
: In-tank (factory replacement)
Size
: Maximum Diameter 38mm
: Length 111mm (Inlet to Outlet) / Maximum Length 114mm
: Suction Inlet O.D. 11mm / Discharge Outlet O.D. 9mm
1. Fuel Pressure to Amount of Flow
(The following numbers do not guarantee the actual amount of flow.)
Fuel
Press.
[kPa] 300 350 400 450 500
Amount
of
Flow
12
[V]
215 195 180 165 145
[L/h] 14
[V]
265 250 235 220 205
INSTALLATION
1. Before Installation
Make sure that all of the parts listed in the Parts List are included in the kit and all parts are
correct. If any part is missing or incorrect, contact your Authorized HKS Dealer immediately.
(1) Release the fuel pressure before installation to avoid fuel from leaking.
(2) If more than 2/3’s of fuel is in the fuel tank, drain the fuel until it’s less than 2/3’s to prevent
fuel from leaking.
WARNING
To prevent an explosion and/or fire, work on the vehicle away
from any flammable areas. Also, do not work on the vehicle
when the engine, exhaust pipes, and/or catalyzer have not
cooled down. Make sure fuel does not leak in order to prevent
fire, referring to the factory manual.
Disconnect the negative terminal of the battery before beginning installation to
prevent electrical damage and/or shock.
NOTE
Work on the vehicle in a well-ventilated area since fuel may leak during installation.
For optimal performance, larger injectors and/or a fuel pressure regulator may be
necessary.
2. Removal of Factory Parts
Use this instruction manual and the manufacturer’s service manual as a reference.
(1) Remove the factory parts necessary to replace the fuel pump referring to the factory service
manual.
(2) Disconnect the wiring coupler on top of the fuel pump. Unlock the retainer and disconnect
the fuel hose. Make sure no foreign objects get inside the hose.
NOTE
・
Take all measures to prevent fuel from leaking.
