Code
Failure Cause
How to solve
E001
Ground detection sensors Clean the sensors at the front bottom of the cleaner
E002
Middle brush
Clean the rubbish such as hair, thread wrapped on the brush
E003
Power off
Use the adapter to charge, after full charged, then use again
E004
Left & right wheel
Check the left and right wheels, clean the rubbish on it
E005
Dustin poor contact
Check the dustbin and re-fix the dustbin alter cleaning
If
the failure still exist after the above check, please contact the after-sale service maintenance,
professional maintenance staff or the technical center of the company, don't disassemble and maintain it
by yourself.
Technical specifications:
Applicable models
SWR22
1
Rated Voltage
Ni-Cd 14.4V or Ni-MH 14.4V (Europe only)
2
Batterv
Recharqeable batterv (the charqe time is about 5h)
3
Working Hours
About 60 (1500mAh) / 90min (2200mAh) / 80 min (1700mAh)
4
Rated power
<24W
5
Opetating temperature
-10 to 45
°
C
6
Operating Humidity range
S85RH
7
AC/DC adapter
AC 100/240V - 50/60Hz DC 24v 1.0A
8
Wireless remote
ISM frequency band 2.4GHz
9
Specification
· 320x87mm (including the wheel height)
10 Weight
3.2kg
11 Battery capacity
1500mAh /2200mAh / 1700mAh
The cleaner can not charge automatically :
1. Check whether the adapter is oonnected well with the charger and whether power LED of the charger lighting.
2. Check whether the battery power is too low ; if so, charge the cleaner with the adapter directly.
3. Make sure there is no barrier in front of the docking station.
4. Use the remote oontroller to let the cleaner go back te the docking station.
lncreased noise
in
cleaning :
1. Clean the dustbin and filter.
2. Check whether the brush or side brush is too dirty.
3. If the noise still too big, you may send back the cleaner te the after sale service maintenance to add lubricants.
The cleaner stops working suddenly and rings intermittently :
1. Check whether the set cleaning lime is over.
2. Check whether there are failure oodes on the display by reference of the followings.
The cleaner back off continuously :
1. Avoid use in sunlight or dark oolor carpe!.
2. Pat the front bumper.
The cleaner dropped from the stair :
Clean the ground detection sensors at the front bottom of the cleaner.
The cleaner can not auto-charging after didn't use in a long time :
Use adapter te full charged first.
The cleaner stop to worik, but not error code display :
Don't disassemble and maintain il by yourself, contact the alter sale service maintenance.
Failure information which may appear during using
