INSTRUCTION FOR USE
1 Choose the method you need (Place the base horizontally on the table, fixed to the wall with
screw or directly hang on the clothes rod)
2 Hang up or place the clothes to be ironed.
3 Pick up the iron, press the middle of the water tank, the water tank will pop up automatically. Pull
out the seal on the back of water tank and inject distilled water until it full, then assemble the water
tank seal (Figure 3) and install the water tank into the base (see figure 4)
Figure 3
Figure 4
Tips: Water tank should not be filled with hot water, fragrance, vinegar, starch, discaling
agents. Ironing additives or other chemicals substance.
4
Plug the plug into a grounded socket, press
bright red light, at the same time the appliance
emits a long “D” sound, the appliance does not heat.
5
Tap the iron button
once to enter the 1
st
level, the indicator light is blue. At the same time
the appliance emits a “D” sound. If the temperature does not reach the set value, the 1
st
level
indicator light flashes. When the heating reaches the set temperature, the 1
st
level indicator
light stays blue and steady (will not flash), you can start using.
6
Tap the iron button
again to enter the 2
nd
level, the indicator light is blue. At the same time
the appliance emits a “D” sound. If the temperature does not reach the set value, the 2
nd
level
indicator light flashes. When the heating reaches the set temperature, the 2
nd
level indicator
light stays blue and steady (will not flash), you can start using.
