Maintenance
1.
Change the dust bag: when the dust full indicator turns red or loss of suction is noticed, it is
time to clear the dust bag or replace with a new bag. (
Fig 10
)
l
Open the front cover by touching front cover button. (
Fig 11
)
l
Take out the bag holder then remove the full dust bag.
(Fig 12)
Installing the dust bag: insert the dust bag into the bag holder and then put it in the slot
cabinet.
(Fig 13)
Note: If the dust bag is not installed, the front cover can’t be closed
2.
Inlet filter: clean the filter with warm water and allow to dry fully before placing back into the
unit.
(Fig 14)
Replacing the inlet filter: clip down and remove the inlet cover, remove and replace with a
suitable filter.
(Fig 25)
3.
Clean the outlet filter: open the outlet cover and take out the HEPA frame and filter. Wash it
and install it after the filter has fully dried.
(Fig 16/17)
Fig 10 Fig 11 Fig 12
Fig 13 Fig 14 Fig 15
Fig 16 Fig 17
