HKC P10H6 User Manual Download Page 41

Page: 41 / 46

tekst

Before contacting our service department you can go through the following for
possible solutions.

Problem

Solution

TV will not turn on

• Make sure the power cord is

plugged in.

• The batteries in the remote control

may be drained; replace the

batteries.

No picture, no sound

• Check the cable between TV and

antenna/external AV device.

• Press the power button on the

remote.

• Press the SOURCE button the

remote, then press the



button

repeatedly to select the TV source.

Poor picture, sound OK

• Check the cable between TV and

antenna/ external AV device.

• Try another channel, the station may

have broadcast difficulties.

• Adjust the brightness/contrast in the

Video menu.

• Check that the unit is set to PAL

Audio noise

• Check if the cables are connected

properly.

• Move any infrared equipment away

from the TV.

No audio

• Make sure the volume is not turned

off or set to minimum.

Photos, videos and music from a USB

device are not displayed

• Check if the USB storage device

is capable of mass storage, as

described in the documentation that

came with the storage device.

• Check if the USB storage device is

compatible with the TV

• Check if the audio and image file

formats are supported by the TV.

Troubleshooting

Summary of Contents for P10H6















































Search results

Summary of Contents for P10H6

Reviews:

Related manuals for P10H6

Brands by name

Popular brands

HKC P10H6, User Manual

Search results

Summary of Contents for P10H6

Reviews:

Related manuals for P10H6

Brands by name

Popular brands