Camera Installation
Figure
1
Figure
2
Figure
4
Video/
Camera
1.Install the SD card, power on, green light on. If not
install the SD card, green light on, red light flash.
2.Start taking video, press the video / photo button
(Figure 1). The indicator light behind the camera
display status:green light on,red light flash one time.
Repeat the above steps, take pictures.
3.When taking video,just press the video/Photo button
(Figure 1) for 3 seconds. Lights behind the camera
display status: Green light on, red light on.If you want
to exit the video, only need to press long video/Photo
button (Figure 1) for 3 seconds. The lights behind the
camera display status: Red light extinguish, green light
on.
4.When the camera SD card is full,the red light by the long
on, becomes automatic off, green light on. If you want
to keep your photography needs to remove the SD
card. Then put the content of the SD card input to
computer.Input empty then continue photography.
(Note: 5MP camera status lights are green /Blue)
5.MicroSD Card can now be used as a Flash Drive.
6.Go to "NO NAME"drive, go into the DCIM Folder,
Go into the 100DSCIM Folder, AVI files can be played
on several media players such as "Quicktime."
7.HAVE FUN!!!
■
If you have trouble playing the files with Quicktime
try your other media players. You can also look online
for recommended free downloadable AVI players.
■
Video camera does not record sound.But can record
video and take photos.
■
Micro SD Card should be placed with the little
copper connections facing as show in.(image 4)
■
No compression video files can be moved or deleted.
Fittings
CARD READER
SD CARD
USING THE ON-BOARD VIDEO CAMERA
Camera
lens
SD
Card
Slot
camera
Screw
