Hiyasu 3NHY8690, Operating Manual

Page: 5 / 20

En-4
Fig. 1 Indoor Unit
1
Operating Control Panel (Fig. 2)
2
MANUAL AUTO button
●
When the MANUAL AUTO button is
pressed in for more than 10 seconds, the
forced cooling operation will start.
●
The forced cooling operation is used at
the time of installation.
Only for authorized service personnel's
use.
●
When the forced cooling operation starts
by any chance, press the START/STOP
button to stop the operation.
● Please press the button at
FILTER IN-
DICATOR RESET
3
Indicator (Fig. 3)
4
Remote Control Signal Receiver
5
OPERATION Indicator Lamp (green)
6
TIMER Indicator Lamp (orange)
●
If the TIMER indicator lamp fl ashes when
the timer is operating, it indicates that a
fault has occurred with the timer setting
(See Page 17 Auto Restart).
7
ECONOMY Indicator Lamp (green)
●
ECONOMY indicator lamp lights when
ECONOMY OPERATION and 10 °C HEAT
OPERATION is operating.
8
Intake Grille (Fig. 4)
9
Front Panel
0
Air Filter
A
Air fl ow Direction Louver
B
Right-Left Louver
(behind Air fl ow Direction Louver)
C
Drain Hose
Fig. 5 Remote Controller
D
Signal Transmitter
E
10 °C HEAT button
F
MODE button
G
ECONOMY button
H
OUTDOOR UNIT LOW NOISE button
I
ON TIMER button
J
OFF TIMER button
K
CLOCK ADJUST button
L
POWERFUL button
M
SET TEMP. button ( / )
N
START/STOP button
O
FAN button
P
SWING button
Q
SET button
R
SLEEP button
S
CANCEL button
T
RESET button
U
SELECT button ( / )
V
Remote Controller Display (Fig.6)
W
Operation Mode Display
X
LOW NOISE MODE Display
Y
Temperature SET Display
Z
Transmit Indicator Display
[
FAN Speed Display
\
SWING Display
]
Clock & TIMER Display
9332428001_OM.indb 4 9332428001_OM.indb 4 1/7/2011 12:00:38 PM 1/7/2011 12:00:38 PM