HIMC Installation Guide
About this Guide
1-2
HIWIN MIKROSYSTEM CORP.
MH07UE01-1911
1.1 General precautions
This guide is for HIMC, HIWIN Motion Controller. Before using the product, please carefully read through
this guide. HIWIN Mikrosystem (HIWIN) is not responsible for any damage, accident or injury caused by
failure in following the installation instructions and operating instructions stated in this guide.
Do not disassemble or modify the product. The design of the product has been verified by structural
calculation, computer simulation and actual testing. HIWIN is not responsible for any damage,
accident or injury caused by disassembly or modification done by users.
Before installing or using the product, ensure there is no damage on its appearance. If any damage
is found after inspection, please contact HIWIN or local distributors.
Carefully read through the specification noted on product label or technical document. Install the
product according to its specification and installation instructions stated in this guide.
Ensure the product is used with power supply specified on product label or in product requirement.
HIWIN is not responsible for any damage, accident or injury caused by incorrect power supply.
Do not repair the product by yourself when it malfunctions. The product can only be repaired by
qualified technician from HIWIN.
