Network Mini PT Dome Camera
·
Quick Start Guide
6
6
●
Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.
Cautions
●
Make sure the power supply voltage is correct before using the
camera.
●
Do not drop the camera or subject it to physical shock.
●
Do not touch sensor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
●
Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfunction), and affect the endurance of sensor at the same
time.
●
The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.
●
Do not place the camera in extremely hot, cold (the operating
temperature shall be-30°C ~+60°C, or -40°C ~ +60°C if the
camera model has an “H” in its suffix), dusty or damp locations,
and do not expose it to high electromagnetic radiation.
●
To avoid heat accumulation, good ventilation is required for
operating environment.
●
Keep the camera away from liquid while in use.
Summary of Contents for DS-I12Q
Page 1: ...1 Network Mini PT Dome Camera Quick Start Guide ...
Page 38: ...0 ...
