HITZE CUBO 700 Operation And Installation Manual Download Page 3

 

WWW.HITZE.PL 

 

FIREPLACES

 

| STOVES | BIOFIREPLACES | GARDEN HEATERS| ACCESSORIES 

INTRODUCTORY INFORMATION 

Dear Customer, 
Thank you for buying Hitze product! 
 
Natural  heating  –  these  words  perfectly  reflect  the  philosophy  of  HITZE  brand.  In  line  with  this  philosophy,  we 
produce fireplaces and stoves fired with wood or wood pellets, i.e. the raw materials which are the least harmful 
for  the  environment.  Using  a  state-of-the-art  technology,  we  have  created  innovative  solutions  offering modern 
designs and high heating efficiency. 
Our products have been designed to provide you with trouble-free operation and cosy warmth! 
 
Before installing and connecting the fireplace insert, it is absolutely essential to become familiar with the Operation 
and Installation Manual and check if all components are included. 
 
The information contained in the Operation and Installation Manual is crucial for ensuring the correct functioning 
of the fireplace insert, and thus eliminating the risk of damage and accidents caused by improper use. 
In the case of doubts or operation-related problems, contact your purchase point or the Manufacturer. 
 
NOTE:  
This device must not be used by children. 
Never leave your children or animals unattended when the fire is burning or when the fireplace is still hot. 
Danger of burns (the glass and parts of the fireplace installation can be very hot).  
 
In order to improve the product, the Manufacturer reserves the right to  make changes in drawings, photographs 
and descriptions or to modify the parameters of equipment without notice at any time.    
The  Operation  and  Installation  Manual  may  not  be  copied  as  a  whole  or  in  part  without  prior  consent  of  the 
Manufacturer. Please make sure that the Operation and Installation Manual is stored out of reach of children. 
If  the  Operation  and  Installation  Manual  is  destroyed,  lost  or  damaged,  contact  your  purchase  point  or  the 
Manufacturer and provide the identification data of your device to obtain a replacement copy. 
 

1.

 

GENERAL INFORMATION 

1.1

 

Safety 

Compliance with the Manual is essential for ensuring the correct functioning of the fireplace insert and avoiding 
damage and accidents caused by improper use. 

1.1.1

 

Please observe the following safety rules:  

 

before installing the insert or performing any maintenance work on it, make sure that you have read and 
understood the Operation and Installation Manual;  

 

the  fireplace  insert  should  be  installed  at  the  most  convenient  location  and  in  conformity  with  the 
applicable construction and fire prevention laws; 

 

installation, maintenance and operation control activities may only be performed by qualified specialists; 

 

the device may only be used in accordance with its intended purpose; 

 

it is absolutely necessary to provide the installation site with appropriate ventilation and air intake sources; 

 

a clothes dryer may be placed at least 1.5 m away from the insert (to minimize the risk of a fire); 

Summary of Contents for CUBO 700































Reviews: