HITSA BORCH Compressor Pump
18
MAINTENANCE
Regular maintenance will prolong the life of your HITSA product and also ensure
optimal operating performance.
HITSA recommends that the air pump system should be maintained according to
the following maintenance schedule.
Table 5: Maintenance list
Maintenance list
Monthly Semi Annual
Annual
Check the pump handle and
rubber gaskets for proper
functioning. Replace gaskets if
necessary.
●
When the HPFI switch located in
the fuse box (Figure 1, item 2) is
switched on (1) it must trip when
the test button (Test) is pressed.
●
Remove dirt from the cabinet
with detergent. For regularly
cleaning, detergent should not
contain abrasives or solvents.
●
Check Oil level: On the side of
the compressor body is a
‘seeing’ glass. The oil level must
be in the middle.
●
Change Oil and air filter:
Remove compressor from
cabinet and drain oil using
proper tools and avoiding
spillage and contamination. Fill
up with correct grade oil (0,5L),
until oil can be seen in the
“viewing-glass”. Run
compressor for 5min and top off
if necessary. Change air filter.
●