3.4 Auto Scan Menu
AUTO SCAN MENU
SCAN: 1
TITLE: --------------
START POINT: 000.00
TILT & ZOOM: 000.00
END POINT: 000.00
SAVE & EXIT
EXIT
/
: move cursor up and down.
/ : move cursor left and right or select or change values.
: change the character at
TITLE.
/
: exit current menu without data saving.
ESC
3.4-1 Set Auto Scans
Move cursor to
COURSE:
and set course number by / .
Move cursor to
TITLE:
and set proper title by and / .
Move cursor to
START POINT:
and set start point by joystick control with
pressing
CTRL
key.
Do not release
CTRL
key until stop the camera's zooming, panning and
tilting motion.
If you do that, improper data will be saved.
TILT & ZOOM:
and
END POINT:
is can be set as like as above setting
methods.
3.4-2 Run Auto Scan
The method is similar as the tour's. Press number and press
SCAN
key.
For example, you want to run auto scan course 4, press
4
key and press
SCAN
key.
If you are in menu mode, this is invalid.
15