3.2 Preset Menu
PRESET MENU
NUMBER: 01
TITLE: -------------
0/1234567890 1/1234567890
2/1234567890 3/1234567890
4/1234567890 5/1234567890
SAVE & EXIT
EXIT
/ : move cursor up and down.
/
: move cursor left and right or select or change values.
: move dome camera to saved preset point at
NUMBER:xx,
or
without data saving.
character at
/
: exit current menu
ESC
3.2-1 Set Presets
You can save up to 60 preset points. Each preset point has pan, tilt,
zoom data which you defined.
Move cursor to
NUMBER: xx
and control joystick with pressing
CTRL
key. Now camera zooming, panning and tilting can be controlled by
joystick. If you want to save the preset point, release
CTRL
key. Than
you can move menu up and down by the joystick and automatically
current position is saved. If the preset point setting is end, the - - mark
will be changed to
Be caution!
Current data saving is temporary. If you save data permanently, you have
to select
SAVE DATA
command at menu.
To insert title, move cursor to
TITLE:
and set proper title by and / .
When you use
CTRL
key, you must release this key after camera's pan,
tilt, zoom action is completely finished.
12
3.2-2 Set Shortcut Preset
Press preset number key and press
PGM
and press
PRST
key. For
example, if you want to save to number 1 preset point.
press 1 key and press
PGM
key and press
PRST
key.