Hitron HCGI-P61DNFxW2, Instruction Manual

Page: 12 / 21

MANUAL
- REGISTRATION
Manual white pixel defect information registration
1) Press the Enter button to turn White pixel compensation position marker display.
2) Use the Arrow buttons align the marker with the position of the white pixel.
3) Press the Enter button to exit and Press the EXIT button to save.
Note : In manual detection mode, the detection data is always treated as a very large white
pixel. Up to 64 white pixel compensation.
- NEXT REGISTRATION
Continue with manual white pixel compensation settings
- REG.POINT
Selects whether to display the registered White or Black pixels
- CURSOR COLOR
Cursor color during manual defect registration
- BLINK
Cursor display blinking during manual defect registration
- REG.NUMBER
Registered white pixel defect count display
- DATA CLEAR
Initializes the white pixel compensation information
Select erasing white pixel function to press Enter button (YES)
<ADVANCED MENU>
AEME (Auto Exposure/Manual Exposure) selection,(shutter/AGC).
This control adjusts the amount of exposure using the shutter speed.
12-1. AUTO
Select Auto to have exposure control performed automatically.
AE LEVEL (Auto Exposure Level)
Set the AE level using the sliding scale. Set exposure control so that the output level (evaluation
value) is the target brightness level (AE reference level). This control is called AE gain control.
AGC MAX
Set the AGC (Auto Gain Control) maximum setting to adjust brightness.
This control adjust the exposure amount.
SENS UP (Slow Shutter)
Adjust the proper brightness in Low-light conditions. Select the setting for slow shutter speed to
allow extra light into the camera (AUTO and OFF). Select Auto to have the camera automatically
make this adjustment. Select Off to disable this function.
12
-
2
.
MANUAL
Select Manual to have exposure control performed manually.
SHUTTER
Select the shutter speed.
AGC MAX
Set the maximum AGC (Automatic Gain Control, DB) to adjust brightness.
12
-
3
.
FIX
Exposure control is stopped. AE does not track even if the subject brightness changes.
SHUTTER
Select the shutter speed.
AGC
Set the AGC (Automatic Gain Control, DB) to adjust brightness.
12. SHUTTER / AGC
11