Hitron CGNM User Manual Download

Page: 71 / 124

WIRELESS

Hitron CGNM-2250 User’s Guide

Wireless

This chapter describes the screens that display when you click

Wireless

in the

toolbar. It contains the following sections:



Wireless Overview

on page



The Basic Settings Screen

on page



The Access Control Screen

on page

5.1

Wireless Overview

This section describes some of the concepts related to the

Wireless

screens.

5.1.1

Wireless Networking Basics

Your CGNM-2250’s wireless network is part of the Local Area Network (LAN), known
as the Wireless LAN (WLAN). The WLAN is a network of radio links between the
CGNM-2250 and the other computers and devices that connect to it.

5.1.2

Architecture

The wireless network consists of two types of device: access points (APs) and
clients.



The access point controls the network, providing a wireless connection to each

client.



The wireless clients connect to the access point in order to receive a wireless

connection to the WAN and the wired LAN.

Summary of Contents for CGNM


























































































































Search results

Summary of Contents for CGNM

Reviews:

Related manuals for CGNM

Brands by name

Popular brands

Hitron CGNM, User Manual

Search results

Summary of Contents for CGNM

Reviews:

Related manuals for CGNM

Brands by name

Popular brands