Hitron 50201270, Instruction Manual, Page: 19 / 25

12
5.2.5 ALARM/MD/FD
<ALARM/MD/FD MENU>
MODE
AREA SEL
- - -
DEFAULT
ADJ TOP/LEFT
ADJ BOT/RIGHT
SENSITIVITY
DWELL TIME
PRESET SEL
END
MODE Select alarm and MD/FD mode.
(OFF/MD/EXT/FD/MD+EXT/FD+EXT)
AREA SEL Select MD area number. (1~4)
Select MD/FD enable/disable.
DEFAULT Set MD area as default.
ADJ TOP/LEFT Adjust the location of the MD area with boundary top and left.
ADJ BOT/RIGHT Adjust the location of the MD area with boundary bottom and right.
SENSITIVITY Adjust sensitivity of MD/FD area. (MD:1~10 / FD:1~64)
DWELL TIME Dwell time setup of zoom preset. (10,20,...,180sec)
PRESET SEL Select zoom preset number.(0FF,1~10)
(When the MD and/or Alarm is/are occurred.)
NOTE1 : The result of face detection can be inaccuracy
BLC MODE Select backlight compensation mode.
(OFF/AUTO/MANUAL)
AREA Select BLC area position.(1~9)
LEVEL Select BLC level.(HIGH/MID/LOW)
WDR MODE Wide dynamic range on/off.
LEVEL Adjust WDR level.(1~100)
5.2.6 PRIVACY
<PRIVACY MENU>
MASK SEL
- - -
DEFAULT
ADJ TOP/LEFT
ADJ BOT/RIGHT
COLOR
MOSAIC
MOSAIC TYPE
END
MASK SEL
Select mask area number.(1~16)
Select mask enable/disable.
DEFAULT
Set mask area as default.
ADJ TOP/LEFT
Adjust the location of the mask area with boundary top and left.
ADJ BOT/RIGHT
Adjust the location of the mask area with boundary bottom and right.
COLOR
Select mask color.(1~8)
MOSAIC
Mosaic display on/off.
MOSAIC TYPE
Mosaic roughness setting. (1 ~ 4)
NOTE1 : The mosaic when the color is transparent, is possible