HTM-30N Series
HITROL CO., LTD. 6
Explosion Proof
Installation
Extension type (AL.C)
Standard type (AL.C)
When installing the Sensor, avoid bumps or obstructions.
Fluid flow is severe near the outlet, and mechanical damage or chattering can occur, so
installation should be avoided in this area.
The temperature and pressure generated inside the tank must be checked to the
specification.
Condensation may occur if the temperature of the housing differs significantly from the
ambient temperature.
Dehumidifier filling or Gortex must be applied.
When tightening flanges or screws, they must be of the same size.
The flange and the flange must be tightened together with the gasket.
(The gasket shall be selected by considering the temperature of the content and the
pressure of the container.)
In the case of explosion - proof products, you should apply the appropriate
rating for your installation.
Some tolerances may occur with actual products.
