HTM-30N Series
HITROL CO., LTD. 10
Marking
User Training
Warranty
& Contact
Warranty & Service
This product is subject to a two-year shipment warranty. Unpaid service will be provided
for any damage found under normal operating conditions. If it does not refer to product
failure, payment will be required for the service charge.
You can request for A/S through our website or by contacting our headquarters.
Headquarters Factory Laboratory Contact Number
Address : HITROL CO.,LTD 141, Palhakgol-road, Jori-eup, Paju-si, Gyeonggi-do, Korea
TEL : 031-950-9700 (Headquarters and A/S)
FAX : 031-943-5600 (Headquarters and A/S)
Product Identification
The product identification mark is attached onto the shows the model name, serial
number, working temperature, working pressure, and matters regarding output. The
serial number is a unique manufacturing number for the identification of products.
Under the aforementioned, do not exceed 15
containers when using the product. In addition, make sure that the ambient
temperature of housing is kept at -
Explosion-proof products are designed according to Article 34 of the Industrial Safety
and Health Act and Article 58-4 of the Enforcement Regulations of the same Act.
Do not apply general products to hazardous areas and explosion-proof products
can only be used in zone 1 and zone 2.
Install in accordance with explosion-proof temperature rating and fluid temperature.
< Weather Proof >
< Explosion Proof >
