HLT-1110 Series
HITROL CO., LTD. 20
The life of the key parts depends in user’s environment and can be used optimally through periodic
checks. Therefore, the user should perform periodic maintenance at least once a year. When using
the U-Seal pot, make sure that the oil (Silicon oil) is charged inside. When used in highly viscous
liquids, the float is covered with foreign substances, which results in a difference in buoyancy, and
should be cleaned periodically.
■
Precautions While Using
- Check the level of tank and presence of the measured materials in the tank before disconnecting the product.
- Seal properly the screws and packing parts during installation to prevent leakage of the product.
- Be careful not to damage the packing or gasket parts when assembling/disassembling the product.
- Disassembly is performed in the reverse order of installation.
■
Disposal of the Product
- If the product is not available and need to be discarded, separate it according to the material and discard.
■ Product Identification
- The product identification mark is attached to the housing and shows the model name, serial
number, workable temperature, working pressure and matters regarding output.
- Serial numbers are unique manufacturing numbers for the identification of products.
The model configuration of the HLT Series is shown below.
HLT-1*10
■ Warranty and Service
The warranty period of this product is two years after shipment of the product and
after sales service will be provided free of charge during this period for problems that
would have occurred during normal use. If after sales service is requested for matters
other than product issues, charges may be requested regardless of the warranty period.
A/S can be requested through our website or below head office.
■
Head office · Factory · Laboratory Contact Number
ADDRESS: HITROL CO., LTD 141(98), Palhakgol-gil-road, Jori-eup, Paju-si, Gyeonggi-do, Korea
TEL: (+82)-31-950-9700 (Head Office and A/S)
FAX: (+82)-31-943-5600 (Head Office and A/S)
F A X : 031-943-5600 (본사 및 A/S)
When moving or transporting the product, do not cause any serious impact on it.
1: Screw Type
2: Flange Type
Connection -
Maintenance
Other
Precautions
Marking
Model
Notation
Warranty
and Contact
Information
