7
- Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.
- Press S3 to select the next digits for setting. The sequence is as follows:
- After all adjustments are completed, press S4 to exit the setting mode.
- Press S1 or S2 to toggle the alarm function on or off. If the alarm function is “on”, the alarm icon will be shown.
Remarks:
1. The alarm sounds daily for 20 seconds at alarm time if the alarm function is “on”. Press any button to stop the
alarm sound.
2. The alarm function is automatically set to “on” when entering setting mode.
3. In the 12-hour display format there will an AM flag or PM flag for the alarm time.
4. If there is no button operation for about 3 minutes in setting mode, the watch will return back to Alarm mode
automatically.
9. Resetting of the watch
-
Press and hold S1, S2, S3 and S4 simultaneously for 1 second. All segments of the display will be “off” and the
watch will be reset. After reset, test patterns will be displayed for a few seconds, and finally the display will be
as follows:
10. Battery change:
•
Battery: Watch 1 x CR 2032, transmitter 1 x CR 2032
•
Please contact a specialized dealer for battery change of the watch.
•
The battery of the transmitter you can change by yourself. Open the battery compartment with a coin in the
direction indicated by the arrow.
•
Do not dispose of empty batteries in household waste. Take them to special local collection sites.
11. Maintenance:
•
Do not expose the instrument to extreme temperatures, vibration or shock
•
Clean it with a soft damp cloth. Do not use solvents or scouring agents.
•
Please do not try to repair the unit. Contact the original point of purchase. Please let change the battery before
complaining. No guarantee if the instrument is handled or opened improperly.
Transmitting frequency: 5,1 KHz
Equipment: chest strap, bike holder and box
S3
ALARM “ON”
HOUR
MINUTE
S3
ALARM “OFF”
S1/S2
ALARM ICON
