HiTRAx 42.7005 Operating Instruction Download Page 1

 

 
 
 

 

 

Cardio Coach  

Cat. No. 42.7005 
 
Operating instruction HiTRAX Cardio Coach Heart rate monitor 

 

 

1.  Introduction 

 

Congratulations! You have got a HiTRAX Cardio Coach. 
With this instrument you can monitor your heart rate, program a training zone with upper and lower limit according 
to your personal fitness plan and you can calculate your calorie consumption. 
Your HiTRAX Cardio Coach consists of a chest strap which registers the heart beat, and a watch which receives 
these signals and monitors them on an LCD display.  
Your HiTRAX Cardio Coach also provides time, stop watch and alarm function.  
 
 

2.  Features 

 

-

 

4 operation modes: Time, pulse, stop watch and alarm. 

-

 

Time mode: indication of weekday, hours, minutes and seconds or month and day, 12 or 24-hour format, auto 
calendar from 2000 to 2049, hourly chime signal, alarm 

-

 

Pulse mode: indication of actual heart rate, programmable training zone (upper and lower limit) with alarm, 
average pulse, training time within the zone, calorie consumption 

-

 

Stop watch mode: 1/100-seconds, up to 24 hours, split time  

-

 

EL backlight 

 
 

3.  Buttons operation 

 
 
 

 
 
 
 
 
 
 

 
 
 
 
 
 
 
 

 

 
 

S1:  ST./SPL. 

-

 

HOURLY CHIME ON/OFF 

S1 

S2 

S4 

S3 

S2 

DISPLAY WITH MONTH-DAY 

DISPLAY WITH SECONDS 

S5 

Summary of Contents for 42.7005









Reviews: