HiTRAX PULSE
–
3D Pedometer with clock
HiTRAX PULSE
–
3D Pedometer with clock
17
16
• Confirm with SET/TMP button.
• The unit is now ready to use.
• Hold and press MODE/
▼
button or REC/
▲
button for a
fast count.
5. Step counting
• Press MODE/
▼
button (3 secondes), if desired, to
reset the day data.
• 0 Step appears on the display.
CAUTION:
This product contains an intelligent algorithm to filter
out non-walking movements. Steps may not be regis-
tered immediately until several regular steps are
detected. The pedometer will start to count after 10
constant steps and will add on the first steps directly.
6. Indication temperature
• Press SET/TMP button and the actual temperature
appears on the display (5 secondes).
7. Display
• Press MODE/
▼
button and you can choose between:
■
Calorie consumption and fat burnt:
KCAL and GM or OZ appear on the display
■
Distance covered in KM or M (miles) and the time
taken (TM) in hours and minutes appear on the dis-
play
■
Average speed in KM/H or M/H and the time taken
(TM) in hours and minutes appear on the display
• Press MODE/
▼
button again and you will return to
normal mode (STEP and time).
8. 7-day-storage
• Press REC/
▲
button.
• DAYS AGO 1 appears on the display.
• Press REC/
▲
button again to show the 7-day-storage
(DAYS AGO 2 – 7).
• When you are in the appropriate day press MODE/
▼
button to show one after the other:
■
Calorie consumption and fat burnt:
KCAL and GM or OZ appear on the display
■
Distance covered in KM or M (miles) and the time
taken (TM) in hours and minutes appear on the dis-
play
■
Average speed in KM/H or M/H and the time taken
(TM) in hours and minutes appear on the display
• After midnight, the current data is automatically placed
in the memory. Time and 0 Step appear on the display.
• The basic setting is retained.
TFA No. 42.2005 Anleitung_02_16 23.02.2016 17:41 Uhr Seite 9