User’s Guide
Page 18 of 33
Picture 3.4.1 Telnet Information
Please enable Telnet function in this page. When Telnet function enabled, the switch can be remotely
managed by Telnet.
3.5 Port Setting
Picture 3.5.1 Port Setting
Port Status: The user can enable or disable a port in this page
.Click “Enable” to open the port,
click “Disable” to close the port, the default setting is “Enable”.
Port Mode: 6 modes can be configured:Auto-negotiation,10 Half,10 Full,100 Half, 100 Full
and1000 Full. Default mode is Auto-negotiation, can be changed in pull-down list.
Flow Control: This function is defaulted closed, open it when needed.
Loop Detection:The function is defaulted closed, open it when needed.A port will be blocked
to cut the loop when loop is detected.( Notice: the port link indicator in front panel will be still
on when the port is blocked, for the physic connection is existed; while the link indicator on
the top of web management pages will be off.)
Chapter 4 Advanced Configuration
http://www.kst-bg.com
